Corrosion Resistant Frp Gel Coat Sheet​ Lightweight Durable For Refrigerator van

FRP Gel Coat is a specialized thermosetting resin coating designed for fiber-reinforced plastic (FRP) products. It serves as both a decorative and protective layer, offering exceptional resistance to corrosion, UV radiation, and mechanical abrasion.

• High corrosion resistance: Withstands exposure to acids, alkalis, salts, and moisture.
• Lightweight: Ideal for applications requiring reduced structural weight.
• Thermal insulation: Low thermal conductivity minimizes heat transfer.
• Easy maintenance: Resists staining and requires minimal upkeep.

The manufacturing of FRP Gel Coat involves precision engineering to ensure optimal performance:

• Material Preparation:
  • Resin selection: Vinyl ester or polyester-based resins with UV stabilizers.
  • Additives: Thixotropic agents for viscosity control and fillers for enhanced mechanical properties.
• Mixing: Precise blending of resin, additives, and pigments to achieve uniform consistency.
• Spraying:
  • Applied using airless sprayers to ensure even coverage and minimal overspray.
  • Multiple thin coats are applied for optimal thickness (0.3-0.5 mm).
• Curing:
  • Cured at 18-25°C with controlled humidity (<80%) to prevent defects.
  • Post-curing may be applied for enhanced hardness.
• Finishing: Sanding and polishing to achieve a smooth, glossy surface.

To ensure maximum performance and longevity:

• Surface Preparation: Clean and sand surfaces to remove contaminants and ensure adhesion.
• Environmental Control: Maintain 16-30°C and <80% humidity during application.
• Mixing: Avoid excessive shear forces to prevent air entrapment.
• Curing: Monitor gel time to avoid premature curing or prolonged pot life.
• Storage: Keep in cool, dry conditions away from direct sunlight.

FRP Gel Coat is widely utilized across industries for its versatility and durability:

• Architecture: Exterior cladding, interior panels, partitions, and decorative features.
• Transportation: Refrigerated truck bodies, ship decks, and automotive trim.
• Industrial: Chemical storage tanks, cooling towers, and pipeline coatings.
• Renewables: Wind turbine nacelles and solar panel mounting systems.
• Marine: Boat hulls, docks, and offshore platforms.